- #How to select asio driver in acid music studio 10 Patch#
- #How to select asio driver in acid music studio 10 windows 7#
- #How to select asio driver in acid music studio 10 series#
- #How to select asio driver in acid music studio 10 download#
You now should be able to hear your voice and the mix in your headphones while recording. But, I think the key step is the "Listen to this device" configuration above. Try depressing and releasing the button to see if it makes a difference. You have a button dealing with "USB" and "Mix". My X1204USB has a different layout than does your 802USB according to photos I found on the Internet. Before arming your record track, select the "Line In" button near the "Arm" button and select the "Behringer" option for left or right channel and configure the "Pan" control on the mixer channel you are recording to reflect the same left or right. Click "Apply" and "Ok" to close the window. Click "Default Playback Device" and select the "Behringer" option. Click "Audio device type" and select "Windows Classic Wave Driver". In that window, select the "Audio Devices" tab. Click "Options" and select "Preferences".
In that new window, select the "Listen" tab and click the check box "Listen to this device". In the "Recording" tab, click "Properties".
In the window, under the "Playback" tab, select the "Behringer Speakers" and click "Set Default". Select it and right click your mouse and select "Sound Settings".
#How to select asio driver in acid music studio 10 windows 7#
With the driver installed, in Windows 7 in "Devices and Printers", the Behringer driver shows up as "USB Audio CODEC". Late note: I did some more testing with my system and found the following. According to Behringer website, ASIO4ALL works fine, too. Here's what I use: BEHRINGER USB AUDIO Driver Win64 2.8.40.
#How to select asio driver in acid music studio 10 series#
Pay particular attention to the information regarding the red buttons on the mixer, although I don't think your mixer has red buttons pertaining to the USB.Īccording to the Behringer website, the driver for this series of mixers is ASIO compliant. Not sure what the heck a virtual machine is in this context.īelow is some more info that I got online in the past regarding my X1204USB mixer from users facing the same scenario previously. When I contacted Behringer about that issue, I was told by a company sound engineer that by trying to bring inputs in from both the mic jack and the USB at the same time I have set up a "virtual machine" that was causing the problem. However, when I tried doing that in my system, I got a high pitched buzz superimposed on all waveforms. NOTE: You can theoretically record 4 tracks simultaneously using a combination of both 1 and 2. If you are recording 2 channels (stereo) simultaneously, don't forget to change the "Pan" control for the 2 tracks so that you route 'left' and 'right' to the correct tracks. Keep in mind, you will have to set your tracks getting input for either 1 or 2 above and also either 'left' or 'right'. You will have to set it as the input device in Windows.
#How to select asio driver in acid music studio 10 download#
You will have to go to Behringer's website and download the USB driver. Use the USB interface to transfer the signals.
Alternately, rather than the mains output, you can use the headphone jack on the mixer if your model has one.Ģ.
#How to select asio driver in acid music studio 10 Patch#
Connect a patch cable from the main outputs to the 1/8 inch stereo mic input on your computer's sound board. You can record audio from the mixer in two ways.ġ. I've got Music Studio 9 on Windows 7 platform and a Behringer X1204USB mixer.
0 kommentar(er)
